Description

It monitors the SafeNet UTSP/Luna SA device’s HSM parameters like operational status, operational errors, critical events and non-critical events. Also monitors NTLS parameters like operational status, connected clients, links count, successful client connections and failed client connections.

Prerequisites

SNMP should be enabled in end device and device should support CHRYSALIS-UTSP-MIB and SNMP credentials should be attached against the device in portal.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
    • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    safenet.hsm.operation.requests

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.1.1.0
    ExpressionNULL
    DescriptionIt represents the rate of HSM (Hardware Security Modules) operations requested.
    [OID: 1.3.6.1.4.1.12383.3.1.1.1]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.hsm.operation.errors

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.1.2.0
    ExpressionNULL
    DescriptionIt represents the HSM operations requested, which have resulted in errors.
    [OID: 1.3.6.1.4.1.12383.3.1.1.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.hsm.critical.events

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.1.3.0
    ExpressionNULL
    DescriptionIt represents the critical HSM events detected. [OID: 1.3.6.1.4.1.12383.3.1.1.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.hsm.noncritical.events

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.1.4.0
    ExpressionNULL
    DescriptionIt represents the non-critical HSM events detected. [OID: 1.3.6.1.4.1.12383.3.1.1.4.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.ntls.oper.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.2.1.0
    ExpressionNULL
    DescriptionIt indicates the current operational state of the NTLS. [OID: 1.3.6.1.4.1.12383.3.1.2.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold3[{"1":"up"},{"2":"down"},{"3":"unknown"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"1":"up"},{"2":"down"},{"3":"unknown"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.ntls.connected.clients

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.2.2.0
    ExpressionNULL
    DescriptionIt indicates the current number of connected clients of the NTLS. [OID: 1.3.6.1.4.1.12383.3.1.2.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.ntls.links.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.2.3.0
    ExpressionNULL
    DescriptionIt represents the current number of links of the NTLS. [OID: 1.3.6.1.4.1.12383.3.1.2.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.ntls.successfulconnected.clients

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.2.4.0
    ExpressionNULL
    DescriptionNumber of successful client connections of the NTLS. [OID: 1.3.6.1.4.1.12383.3.1.2.4.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    safenet.ntls.failed.client.connections

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.12383.3.1.2.5.0
    ExpressionNULL
    DescriptionNumber of unsuccessful client connections of the NTLS. [OID: 1.3.6.1.4.1.12383.3.1.2.5.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSafenet HSM and NTLS Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph