Description

Applicable on the data domain storage devices. Monitors the disk, filesystem, power module status, temperature status, system statistics etc.. Data Domain OS 5.4.0.8-404909. SNMP Obj Id=1.3.6.1.4.1.19746.3.1.36. . Open TCP ports[139,443,80,22,]

Prerequisites

SNMP should be enabled in end device and device should support DATA-Domain-MIB and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    dd.system.disk.errstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.6.3.1.1.14
    ExpressionNULL
    DescriptionProvides the current state of the disk. Possible status values are 1- Ok, 2- Unknown, 3- Absent, 4- Failed, 5- Spare, 6- Available. [OID: 1.3.6.1.4.1.19746.1.6.3.1.1.3, 1.3.6.1.4.1.19746.1.6.3.1.1.14]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD Disk Status - DDOS V5.4.0.8
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold2[{"1":"ok"},{"2":"unknown"},{"3":"absent"},{"4":"failed"},{"5":"Spare"},{"6":"Available"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold3,4[{"1":"ok"},{"2":"unknown"},{"3":"absent"},{"4":"failed"},{"5":"Spare"},{"6":"Available"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dd.filesystem.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.3.2.1.1.7
    ExpressionNULL
    DescriptionProvides the percentage of used space within the file system resource. [OID: 1.3.6.1.4.1.19746.1.3.2.1.1.3, 1.3.6.1.4.1.19746.1.3.2.1.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD File System Space Used - DDOS V5.4.0.8
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dd.filesystem.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.3.1.1.0
    ExpressionNULL
    DescriptionProvides the status of the data domain file system. Possible status values are 1- Enabled, 2- Disabled, 3- Running, 4- Unknown, 5- Error, 6- Cleaning. [OID: 1.3.6.1.4.1.19746.1.3.1.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD File System Status - DDOS V5.4.0.8
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"enabled"},{"2":"disabled"},{"3":"running"},{"4":"unknown"},{"5":"error"},{"6":"cleaning"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5[{"1":"enabled"},{"2":"disabled"},{"3":"running"},{"4":"unknown"},{"5":"error"},{"6":"cleaning"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dd.system.cpu.max

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.5.1.1.1.3
    ExpressionNULL
    DescriptionCPU Max Percentage Busy. [OID: 1.3.6.1.4.1.19746.1.5.1.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD System Statistics - DDOS V5.4.0.8
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dd.system.cpu.avg

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.5.1.1.1.2
    ExpressionNULL
    DescriptionCPU Average Percentage Busy. [OID: 1.3.6.1.4.1.19746.1.5.1.1.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD System Statistics - DDOS V5.4.0.8
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dd.disk.busy.percent

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.5.1.1.1.12
    ExpressionNULL
    DescriptionPercentage of Time Disks were busy. [OID: 1.3.6.1.4.1.19746.1.5.1.1.1.12]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD System Statistics - DDOS V5.4.0.8
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dd.nfs.oper.persec

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.5.1.1.1.4
    ExpressionNULL
    DescriptionNumber of NFS Operations performed per second. [OID: 1.3.6.1.4.1.19746.1.5.1.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD System Statistics - DDOS V5.4.0.8
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dd.nvram.battery.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.2.3.1.1.3
    ExpressionNULL
    DescriptionProvides the NVRAM battery status of the data domain. Possible status values are 0- Ok, 1- Disabled, 2- Discharged, 3- Unknown, 4- Softdisabled. [OID: 1.3.6.1.4.1.19746.1.2.3.1.1.2, 1.3.6.1.4.1.19746.1.2.3.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD NVRAM Battery Status - DDOS V5.4.0.8
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold3[{"0":"ok"},{"1":"disabled"},{"2":"discharged"},{"3":"unknown"},{"4":"softdisabled"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold1,2[{"0":"ok"},{"1":"disabled"},{"2":"discharged"},{"3":"unknown"},{"4":"softdisabled"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dd.temp.sensor.currentvalue

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.1.2.1.1.1.5
    ExpressionNULL
    DescriptionCurrent Temperature Value of the sensor. [OID: 1.3.6.1.4.1.19746.1.1.2.1.1.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD Temperature Sensor Status - DDOS V5.4.0.8
    UnitC

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dd.temp.sensor.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.1.2.1.1.1.6
    ExpressionNULL
    DescriptionProvides the status the temperature sensor. Possible status values are 0- Failed, 1- Ok, 2- Notfound, 3- OverheatWarning, 4- OverheatCritical. [OID: 1.3.6.1.4.1.19746.1.1.2.1.1.1.4, 1.3.6.1.4.1.19746.1.1.2.1.1.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD Temperature Sensor Status - DDOS V5.4.0.8
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold3[{"0":"failed"},{"1":"ok"},{"2":"notfound"},{"3":"overheatWarning"},{"4":"overheatCritical"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,4[{"0":"failed"},{"1":"ok"},{"2":"notfound"},{"3":"overheatWarning"},{"4":"overheatCritical"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dd.power.module.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.1.1.1.1.1.4
    ExpressionNULL
    DescriptionProvides the power module status of data domain. Possible status values are 0- Absent, 1 - Ok, 2- Failed, 3- Faulty, 4- Acnone, 99- Unknown. [OID: 1.3.6.1.4.1.19746.1.1.1.1.1.1.2, 1.3.6.1.4.1.19746.1.1.1.1.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD Power Module Status - DDOS V5.4.0.8
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold0,4[{"0":"absent"},{"1":"ok"},{"2":"failed"},{"3":"faulty"},{"4":"acnone"},{"99":"unknown"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"0":"absent"},{"1":"ok"},{"2":"failed"},{"3":"faulty"},{"4":"acnone"},{"99":"unknown"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dd.fan.sensor.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.1.3.1.1.1.6
    ExpressionNULL
    DescriptionProvides the current status of the fan. Possible status values are 0 - Not Found, 1 - Ok, 2 - Failed.
    [OID: 1.3.6.1.4.1.19746.1.1.3.1.1.1.4, 1.3.6.1.4.1.19746.1.1.3.1.1.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD FAN Sensor Status - DDOS V5.4.0.8
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,2[{"0":"notfound"},{"1":"ok"},{"2":"fail"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dd.replicationstate.advanced2

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.8.1.1.1.3
    ExpressionNULL
    DescriptionProvides the state of the replication source/dest pair connection. Possible status values for state are: 1- Initializing, 2- Normal, 3- Recovering, 4- Uninitialized.
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD Replication Status - DDOS V5.4.0.8
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold4[{"1":"Initializing"},{"2":"Normal"},{"3":"Recovering"},{"4":"Uninitialized"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dd.replicationstatus.advanced2

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.19746.1.8.1.1.1.4
    ExpressionNULL
    DescriptionProvides the status of the replication source/dest pair connection. Possible status values for status are: 1- Connected, 2- Disconnected, 3- Migrating, 4- Suspended, 5- NeverConnected, 6- Idle.
    [OID: 1.3.6.1.4.1.19746.1.8.1.1.1.1, 1.3.6.1.4.1.19746.1.8.1.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDD Replication Status - DDOS V5.4.0.8
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,4,5[{"1":"Connected"},{"2":"Disconnected"},{"3":"Migrating"},{"4":"Suspended"},{"5":"NeverConnected"},{"6":"Idle"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph