Description

Monitors the hardware sensors aggregated alarm status (like FRU status, Agent and SP connection status, voltage, current, power supply, cooling unit, temperature, processors, memory, hard drives, IO, slots, power unit, power consumption, indicator) and power consumption information related to the Oracle server or blade. [using SUN-HW-MONITORING-MIB]

Prerequisites

SNMP should be enabled in end device and device should support SUN-HW-MONITORING-MIB and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    sun.hw.total.powerconsumptionsensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.9.4.0,
    1.3.6.1.4.1.42.2.2.6.1.1.9.1.0, 1.3.6.1.4.1.42.2.2.6.1.1.9.5.0
    ExpressionsunHwMonTotalPowerConsumptionSensorAlarmStatus
    DescriptionIt represents the status of the total power consumption sensor. [OID: 1.3.6.1.4.1.42.2.2.6.1.1.9.1.0, 1.3.6.1.4.1.42.2.2.6.1.1.9.4.0, 1.3.6.1.4.1.42.2.2.6.1.1.9.5.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Total Power Consumption
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Power Consumption Sensors Alarm Status

    Power Consumption Sensors Alarm Status

    sun.hw.total.powerconsumptionsensors.currvalue

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.9.7.0,
    1.3.6.1.4.1.42.2.2.6.1.1.9.6.0
    ExpressionsunHwMonTotalPowerConsumptionSensorCurrentValue
    DescriptionThis attribute defines the current reading of the total power consumption sensor.
    [OIDs: 1.3.6.1.4.1.42.2.2.6.1.1.9.6.0, 1.3.6.1.4.1.42.2.2.6.1.1.9.7.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Total Power Consumption
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Power Consumption Sensors Current Value

    Power Consumption Sensors Current Value

    sun.hw.cumulative.sensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.1.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all sensors monitoring various parameters on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Cumulative Staus of all Sensors

    Cumulative Staus of all Sensors

    sun.hw.cumulative.voltagesensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.2.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all sensors monitoring voltage on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Voltage Sensor Cumulative Status

    Voltage Sensor Cumulative Status

    sun.hw.cumulative.currentsensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.3.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all sensors monitoring electric current on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Electric Current Sensors Cumulative Status

    Electric Current Sensors Cumulative Status

    sun.hw.cumulative.powersupplysensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.4.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all sensors monitoring power supplies on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.4.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Power Supplies Cumulative Status

    Power Supplies Cumulative Status

    sun.hw.cumulative.coolingunits.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.5.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all cooling units on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.5.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Cooling Unit Cumulative Status

    Cooling Unit Cumulative Status

    sun.hw.cumulative.temperaturesensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.6.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all sensors monitoring temperature on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.6.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Temperature Sensor Cumulative Status

    Temperature Sensor Cumulative Status

    sun.hw.cumulative.processors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.7.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all processors on a Oracle server
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.7.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Processors Cumulative Status

    Processors Cumulative Status

    sun.hw.cumulative.memory.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.8.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all memory devices on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.8.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    sun.hw.cumulative.harddrives.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.9.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all hard drives on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.9.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Hard Drives Cumulative Status

    Hard Drives Cumulative Status

    sun.hw.cumulative.io.sensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.10.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all IO sensors on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.10.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    IO Sensors Cumulative Status

    IO Sensors Cumulative Status

    sun.hw.cumulative.slots.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.11.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all slots or connectors on a Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.11.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Slots/Connetions Cumulative Status

    Slots/Connetions Cumulative Status

    sun.hw.cumulative.uncategorisedsensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.12.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of all sensors that do not fall into any defined category in sunHwMonOtherSensorsGroup. [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.12.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Uncategorised Sensors Cumulative Status

    Uncategorised Sensors Cumulative Status

    sun.hw.cumulative.powerunitsensors.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.7.1.13.0
    ExpressionNULL
    DescriptionThis attribute defines the cumulative status of Power Unit sensors on an Oracle server.
    [OID: 1.3.6.1.4.1.42.2.2.6.1.1.7.1.13.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Sensors Aggregate Alarm Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    sun.hw.fru.alarmstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.6.1.1.4,
    1.3.6.1.4.1.42.2.2.6.1.1.6.1.1.8
    ExpressionsunHwMonFruStatus
    DescriptionMonitors the alarm status of the Oracle server's FRU. [OID: 1.3.6.1.4.1.42.2.2.6.1.1.6.1.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware FRU Alarm status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,6[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,3[{"1":"cleared"},{"2":"critical"},{"3":"major"},{"4":"minor"},{"5":"warning"},{"6":"indeterminate"},{"7":"informational"},{"8":"pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    FRU Alarm Status

    FRU Alarm Status

    sun.hw.agent.sp.connectionstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.2.6.1.1.5.2.0,
    1.3.6.1.4.1.42.2.2.6.1.1.5.1.0
    ExpressionsunHwMonAgentSPConnectionStatus
    DescriptionMonitors the status of the connection between Oracle hardware monitoring agent and the Service Processor (ILOM). [OID: 1.3.6.1.4.1.42.2.2.6.1.1.5.2.0, 1.3.6.1.4.1.42.2.2.6.1.1.5.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Hardware Monitoring agent and SP Connection Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"1":"unknown"},{"2":"connected"},{"3":"degraded"},{"4":"disconnected"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Agent Service Processors (IOLM) Connesction Status

    Agent Service Processors (IOLM) Connesction Status