Description

Applicable on XTM fireware devices. Monitors the watch-guard system and policy statistics like CPU utilization, traffic rate, connection rate, connection drop rate and discarded packet rate.

Prerequisites

SNMP should be enabled in end device and device should support WATCHGUARD-SYSTEM-STATISTICS-MIB, WATCHGUARD-POLICY-MIB and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
    • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    watchguard.cpu.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.6.3.78.0
    Expression(wgSystemCpuUtil5)/100
    DescriptionCPU utilization of the system in last 5 minutes. The value is measured in 0.01%. [OID: 1.3.6.1.4.1.3097.6.3.78.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard System Statistics
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.number.of.active.connections

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.6.3.80.0
    ExpressionNULL
    DescriptionTotal number of currently active connections of the system. [OID: 1.3.6.1.4.1.3097.6.3.80.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard System Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.connection.request.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.6.3.30.0
    ExpressionNULL
    DescriptionThe total number of the connection requests since system is up. [OID: 1.3.6.1.4.1.3097.6.3.30.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard System Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.connection.request.drop.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.6.3.34.0
    ExpressionNULL
    DescriptionThe total number of the connection requests being dropped since system is up. [OID: 1.3.6.1.4.1.3097.6.3.34.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard System Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.traffic.in

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.6.3.9.0
    Expression(wgSystemTotalRecvBytes)/1000000
    DescriptionThe rate of total number of bytes received since system is up. This number includes both cut through traffic and host traffic. [OID: 1.3.6.1.4.1.3097.6.3.9.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard System Statistics
    UnitMBps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.traffic.out

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.6.3.8.0
    Expression(wgSystemTotalSendBytes)/1000000
    DescriptionThe rate of total number of bytes sent since system is up. This number includes both cut through traffic and host traffic. [OID: 1.3.6.1.4.1.3097.6.3.8.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard System Statistics
    UnitMBps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.policy.traffic

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.4.2.2.1.3
    ExpressionNULL
    DescriptionTotal traffic in bytes since setting up this policy. [OIDs: 1.3.6.1.4.1.3097.4.2.2.1.2, 1.3.6.1.4.1.3097.4.2.2.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard Policy Statistics
    UnitBps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.policy.discarded.pkts

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.4.2.2.1.14
    ExpressionwgPolicyDisc*60
    DescriptionTotal number of packets discarded since setting up this policy. [OIDs: 1.3.6.1.4.1.3097.4.2.2.1.2, 1.3.6.1.4.1.3097.4.2.2.1.14]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard Policy Statistics
    Unitpacket/min

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    watchguard.policy.active.conn

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3097.4.2.2.1.12
    ExpressionNULL
    DescriptionTotal number of active connections since setting up this policy. [OIDs: 1.3.6.1.4.1.3097.4.2.2.1.12, 1.3.6.1.4.1.3097.4.2.2.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameWatchguard Policy Statistics
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph