Description
This template is used to capture the XenServer Host performance present in the XenServer.
Prerequisites
Gateway should be up and running. XenServer device should be reachable from Gateway. XenServer Host should be in managed state.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
xenserver.pif.lo.tx
Metric Details
| Applicable for | Device |
| Description | It provides the Bytes per second transmitted to physical loopback interface |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Bps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
XenServer pif LO transfer
xenserver.pif.lo.tx.errors
Metric Details
| Applicable for | Device |
| Description | It provides the errors per second by physical loopback Interface |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Errors per Sec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.pif.lo.rx
Metric Details
| Applicable for | Device |
| Description | It provides the Bytes per second received on physical loopback interface |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Bps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
XenServer pif LO recieve
xenserver.pif.lo.rx.errors
Metric Details
| Applicable for | Device |
| Description | It provides the errors per second on physical loopback Interface |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Errors per Sec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.pif.tx.errors
Metric Details
| Applicable for | Device |
| Description | It provides the errors per second by physical Interface |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Errors per Sec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.pif.rx.errors
Metric Details
| Applicable for | Device |
| Description | It provides the errors per second on physical Interface |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Errors per Sec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.latency
Metric Details
| Applicable for | Device |
| Description | It defines the latency (in ms) |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | ms |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.memory.reclaimed
Metric Details
| Applicable for | Device |
| Description | It provides the host memory reclaimed by squeeze |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Bytes |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.memory.max.reclaimed
Metric Details
| Applicable for | Device |
| Description | The maximum amount of memory that is reclaimed (in bytes) |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | Bytes |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.network.latency
Metric Details
| Applicable for | Device |
| Description | It defines network latency (in s) |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | s |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
xenserver.statefile.latency
Metric Details
| Applicable for | Device |
| Description | It defines the statefile latency (in s) |
| Category | XenServer |
| Collector Type | Gateway |
| Monitor Name | XenServer Host Performance - Advanced |
| Unit | s |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph